Advanced Mechanical Engineering Solutions
STRESS & STRAIN ANALYSIS
Hooke's Law for General Stress - Strain Calculations
Calculates stress-strain relations for a homogeneous isotropic material.
Plane Stress and Transformations
Calculates normal and shear stresses at a specific point for rotated coordinate system for plain stress state.
Principal Stress and Maximum Shear Stress Calculator
Calculates in-plane principal and maximum shear stress, the principal and maximum shear stress angle and Von Mises stress at a specific point for plane stress. Mohr's circle is also drawn according to input parameters.
Mohr's Circle for 3D Stress Analysis
Calculates principal stresses, maximum shear stresses and Von Mises stress for 3 dimensional stresses. Calculator can also be used to calculate out-plane stresses for plane stress state. Mohr's circle is also drawn according to input parameters.
Yield Criteria for Ductile Materials
Evaluates material yield condition in plane stress state using Maximum Shear Stress Theory and Distortion-Energy Theory.
Thin Walled Pressure Vessel Stress Calculations
Calculates principal stresses and maximum shear stress of thin-walled pressure vessel. Cylindrical and spherical vessels can be analyzed.
Plane Strain and Transformations
Calculates normal and shear strains at a specific point for rotated coordinate system for plain strain state.
Plane Strain and Principal Strains
Calculates in-plane principal and maximum shear strain, the principal strain angle.
Strain Measurement With Strain Rosette
Calculates normal and shear strains on a plane by using the measurement results of strain gage rosette.
Plane Stress Calculation with Strain Rosette Results
Calculates principal stresses of plane stress state with the usage of strain gage rosette measurement results.
Modulus of Rigidity (Shear Modulus)
Calculates modulus of rigidity of a material with modulus of elasticity and Poisson's ratio values.
Shear Stress (Single and Double Shear)
Calculates shear stress in single and double shear joints.
An example about the calculation of stresses on a pressure vessel, evaluation of yield criteria of material and stress transformation to find shear and perpendicular stresses on welding of the cylindrical body of the pressure vessel.
Torsion Of Solid Shaft
An example about the calculation of torsional stress on stepped shaft. After calculation of torsional stress, principal stresses are calculated and evaluation of yield criteria of material is done with these stresses.
Principal Stress Calculation with Strain Results
An example about the calculation of normal and shear strain and principal stresses on a machine component with the usage of strain results which have been measured with 45° Strain Gage Rosette.
Beam Deflection Calculators
Engineering Unit Converter
Hertzian Contact Calculator
Keys and Keyseats
Limits, Fits and Tolerances
Screw Thread Calculators
Sectional Properties Calculator
Stress Concentration Factors
Structural Analysis of Beams
Copyright © 2013-